Wood and Plastic Model Kit, Box Condition: VG
$38
Strombecker was famous for this line of precarved hardwood and plastic kits. All parts are made to shape, including the fuselage, which made these kits easy to assembly and finish. The scale is not listed but has a 6.5 inch wingspan when completed. This kit also includes a clear injection molded canopy, wooden base, wire support, color decals, glue and sandpaper and a stand. When complete it makes an impressive desk top display. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Vacuform Model Kit, Box Condition: Sealed
$16
Bagged kit that is still factory sealed. Very high quality vacuform kit from about 1987. Features recessed panel line detail and raised detail were appropriate, full cockpit, optional position landing gear, prop and clear canopy. Vacuform kits are not recommended for modelers who do not have experience building them.
Plastic Model Kit, Box Condition: NM
$27
From all new, state of the art molds. Highly detailed. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Wood and Metal Model Kit, Box Condition: VG
$55
This is a Kyosho kit made and packed in Japan in the 1960s but marketed by Kayeff Inc in California. I estimate the wingspan to be about 36 inches. This is a beautiful classic kit with a high degree of prefabrication for it's day. The kit features completely precut ribs, wheel pants, firewall, elevator, rudder and many other balsa parts (thin and very thick), die-cut plywood fuselage bulkheads, formed wire main and nose landing gear, balloon tires, metal push rods (for control line linkage), a metal hardware pack that is still sealed, numerous other wood and metal parts as needed, window material, tissue covering and more. This kit has not been started. The parts are complete, with the factory sealed ones still bag sealed and many parts still wrapped with the factory Kyosho tape. NOTE: I have lost the plans to this kit. You will need to find a set of Kyosho plans to build this model.
Plastic Model Kit, Box Condition: Good
$85
NOTE: builder only, missing some parts. Please read carefully for the condition. Very nicely detailed model with over 150 injection molded and resin parts that can build one of four different aircraft: EC-135N ARIA/ALOTS, C-135B T/ARIA, EC-135N ARIA and EC-135E ARIA. Features all fine recessed panel lines, detailed interior, choice of TF-33 or J-57 engines, ALOTS pod, Black Box resin detail parts and more. The kit has never been started. Many parts are still in the internal factory sealed bags. The loose parts have been inventoried and NOTE: missing the internal O2 bottles (not seen if the door remains close) and missing ALL clear parts. Includes decals, full instructions, marking paint guide (for EC-135E ARIA and EC-135N ARIRA/ALOTS) and illustrated additional instructions for the resin parts.
Wood Model Kit, Box Condition: VG++
$129
**SAVE! Pick up in Lexington, KY and eliminate all shipping charges. I can meet you at our local Panera Bread for delivery.** This is a large, approximately 90% finished RC model that is truly 'Almost Ready To Fly.' Never started. Inside, everything is exactly as it left the factory. All of the parts that were factory sealed still are and the few that were never sealed have been inventoried complete. Includes all paperwork. NOTE: this kit came in a very sturdy and thick cardboard box. It will ship in that box wrapped in thick brown paper. If you wish for it to be placed inside another box, let me know in the 'comments' section of checkout but be aware that additional shipping charges will apply.
Plastic Model Kit, Box Condition: Exc++
$36
Hard-to-find kit from 1995 that is superbly molded and nicely detailed. Features good cockpit detail, pilot, optional landing skid or wheels, optional tail wheels (in flight and on ground style) and a special in-flight display stand. Includes paint guide and markings for two aircraft: prototype and production. Never started and inventoried complete with all parts and includes decals and instructions.
Plastic Model Kit, Box Condition: Sealed Exc
$62
Still factory sealed. 1994 re-release of the 1982 release- which itself is from the very popular 1960s original molds. Has many operational features including the V-2 missile with removable panel with full interior including fuel tanks, rocket engine and more, working launcher and transport trailer/erector and crew members. Please note that Revell lists this kit as 1/54 but I have noted it as 1/69 because the built missile measures 8" tall and the actual missile is 45.9 feet tall. That comes out to be 1/69.
Plastic Model Kit, Box Condition: Exc
$200
Amazingly well detailed and certainly the finest injection-molded Snipe available in any scale. Never started. All of the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$110
Very finely molded and incredibly well detailed full-hull model with 511 pieces. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Plastic Model Kit, Box Condition: Exc
$165
Very finely molded and highly detailed full-hull model with 360 pieces. Never started and the parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Exc+
$185
Very rare, out of production and the only 1/48 scale Grumman F2F-1 . This model features finely cast parts from high-definition resin, brass PE details, film instruments, clear vaciform windshield (mint condition and not yellowed), excellent cockpit, complete engine, detailed landing gear and more. Includes a full color paint guide and decals for all aircraft listed.
Plastic Model Kit, Box Condition: VG
$34
Excellent multimedia kit that includes parts to correctly build one of three Hawk 75 variants, injection-molded parts with fine, recessed panel lines, numerous high-definition resin castings including a super detailed cockpit, film instruments, many photoetched parts and decals with paint guides for seven different aircraft. The kit has never been started. The resin and PE parts are all still factory sealed; the injection molded parts are either still in the factory sealed bag or inventoried complete. Includes decals and instructions.
Plastic Model Kit, Box Condition: Good+
$24
SALE!! Includes two kits in the one box shown. Kit #1 is never started and inventoried complete with all parts, including decals and instructions. NOTE: Kit #2 has minor and 'professional' quality subassembly as follows: (2) seats and (1) control stick to the cockpit floor. There is no other assembly. Inventoried 100% complete with all parts, decals and instructions present. This very nice model is dated 1988. Features good detail inside and out and includes a color paint guide and decals for ADAC EMS Service and Aero Asahi Japan.
Plastic Model Kit, Box Condition: VG+
$79
Kit includes three T-33A Shooting Star models and a large decal sheet for all three markings. Includes detailed painting guide for all three aircraft. The kits are from quality Heller molds. Features very fine raised panel lines and recessed control surface lines, nicely detailed cockpits, realistic separately molded air intake blocks and jet tail pipe, optional nose for RT-33, optional position speed brakes and well detailed landing gear and gear doors detailed inside and outside. Never started and inventoried complete with all parts and includes decals and instructions. Decals are in 'near mint++' condition.
Plastic Model Kit, Box Condition: VG+
$79
Kit includes three T-33A Shooting Star models and a large decal sheet for all three markings. Includes detailed painting guide for all three aircraft. The kits are from quality Heller molds. Features very fine raised panel lines and recessed control surface lines, nicely detailed cockpits, realistic separately molded air intake blocks and jet tail pipe, optional nose for RT-33, optional position speed brakes and well detailed landing gear and gear doors detailed inside and outside. The kit has never been started. One T-33 is still factory sealed; the other two have been inventoried 100% complete. Includes decals in 'near mint++' condition and instructions.
Plastic Model Kit, Box Condition: Good-
$39
Very highly detailed. Features a rolling chassis build just like the real truck, complete suspension, driveline and exhaust details, complete interior, crew of three, optional raised top or lowered top, 1 Ton 250 Gallon Ben Hur KWT Water Tanker, optional parts to build WC-56 or 57 and more. Molded in green and clear with metal axles. Never started. The parts are still in the internal factory sealed bags and includes decals and instructions.
Resin Model Kit, Box Condition: Exc
$145
Rare kit with legendary Pit Road quality. Features a fantastic resin cast waterline hull of higher quality than any injection moldings could achieve, large details cast in resin, a large number of precision cast metal small, precision injection molded fine details, metal stock and more. Includes two large and extensive decal sheets and a well detailed, illustrated set of instructions including a painting guide and side elevation & overhead drawings. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.
Resin Model Kit, Box Condition: Exc+
$52
Rare and beautiful resin kit with all fine recessed panel lines, detailed cockpit, two vacuform canopies (in mint condition and not yellowed), detailed gear wells, drop tanks and full decals. The kit has never been started. The parts are still in the internal factory sealed bags and includes decals and instructions. The famous 1948 Thunderceptor was a very advanced design, but hybrid jet and rocket engine system created problems, among other things. With it's hybrid afterburning turbojet engine and XLR-11 rocket motor (of X-1 fame), it was the first US aircraft to break the sound barrier in level flight in December of 1951. The second prototype was destroyed but the original XF-91 is preserved at the USAF Museum in Dayton, Ohio.
Resin Model Kit, Box Condition: Good
$95
Rare. Features superb quality resin castings with recessed surface detail, excellent cockpit, many PE details and more. Never started and inventoried complete with all parts and includes decals and instructions.
Keep link list open
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220