Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Heller Santa Maria Columbus' Discovery Ship, 1/90, L865

Plastic Model Kit,   Box Condition: Good-

$34   

1960s issue with wonderful box art. Very nicely detailed kit with 128 parts and when assembled measures 43 cm long. Includes vacuform sails, rigging material, decals and full instructions with rigging diagrams. Never started. Inventoried with all parts present and with instructions. NOTE: missing paper flag sheet.

Doyusha U-Boat German Submarine - Motorized, 1/270, U-200

Plastic Model Kit,   Box Condition: VG

$48   

Older kit that is designed to operate in water. Measures 10 inches long when assembled. Features a metal weight to achieve neutral buoyancy, movable diving planes and a rubber band motor with winding handle. The kit is molded in dark blue (above the waterline) and dark red (below the waterline). The kit has never been started. Inventoried complete with all parts and includes instructions. No decals are shown on the instructions, so I believe that Doyusha did not issue this kit with decals. Please note that there is a small piece (2.5cm x .5cm approx) broke from the hull side; that piece is includes and is an easy fix.

Jo-Han 1958 Dodge Custom Royal 2 Door Hardtop Built, 1/25

Plastic Model Kit,   Box Condition: VG

$69   

Rare. Neatly built and painted model that includes body, excellent clear front and rear windshield, interior tub, chrome front and rear bumpers, chrome headlights, red-tinted clear tail lights, underpan, inner wheels, axles, original whitewall tires (one turned inward) and four chrome hubcaps. Comes completely apart very easily; I have laid it together for the photos. Sold as is.

AMT 1970 Ford Torino Cobra Sportsroof, 1/25, T321

Plastic Model Kit,   Box Condition: Exc

$79   

Rare. Very well detailed model of the stock, 429 Boss Engine NASCAR racer or Drag Car. Includes a wide variety of parts for each version. Features detailed engine and compartment, opening hood, full interior, detailed underside with suspension and exhaust and more. There has been no assembly. NOTE: the body and one hood are painted and decals are applied. Quality of work is 'very good'- it looks fine from a few feet back but up close you can see that it is not professionally done. There is no other painting. The kit is complete except for one (of two) oil breather tubes. With instructions.

Execuform Beech Aircraft Model 28 XA-38 Grizzly - 1943-48 - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Exc

$28   

Still factory sealed. Basic vacuform kit of a rare subject. The Grizzly was a prototype ground attack aircraft. A certain degree of modeling skill is required to build vacuform kits. They are not recommended for beginners.

Eagles Talon ET115-82B Nakajima B6N Jill and 102 Kawasaki Ki-32 Mary - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Sealed

$19   

Includes both factory sealed, very high quality vac kits. Features all fine recessed panel lines, interiors, clear canopy, full plans and more.

Stratton Air Engineering 202 Wright Flyer 58 Inch Wingspan and Fokker Triplane 48 Inch Wingspan Squadron Kites

Wood Model Kit,   Box Condition: VG and Sealed

$24   

Includes both excellent kits. Please note these are not scale models but kites that you build. The Triplane is still factory sealed. The Wright Flyer is opened but never started and complete. It features unique double-dihedral wings, pilot, key plastic pieces, moving control surfaces, string or free flight versions, all spruce framework, full instructions and it even disassembles for travel.

AMT GMC Astro 95 Semi Tractor Truck, 1/25, T510

Plastic Model Kit,   Box Condition: Good

$95   

Rare kit from the 1970s. Super detailed truck with over 250 parts. Features full rolling chassis build up just like the actual vehicle. Includes many chrome plated parts, hollow vinyl truck tires, colorful ATL decals and much more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed (tires and clear only) have been inventoried complete including decals and instructions.

AMT 1933 Willys Van Leapin Lorry / Van-Tastic / Yellow Fever, 1/25, T306-200

Plastic Model Kit,   Box Condition: Good

$45   

Original issue from the 1970s. Nice kit with detailed chassis and engine, tilting hood, full interior, decals for two racers and more. Molded in yellow, clear, chrome plate and with rubber tires. The kit has never been started. It has been inventoried complete with all parts and includes (like new) decals and instructions.

AMT 1970 Chevorlet Monte Carlo - Stock / Custom / Drag Versions, 1/25, T326

Plastic Model Kit,   Box Condition: VG

$95   

From the 1970s and can be built stock, custom or drag. Nicely detailed kit with many optional parts, full engine and compartment, opening hood, detailed underside, full interior and more. The kit has never been started. The white parts that were factory sealed are still in the sealed bags. The clear and chrome parts were never factory sealed have been inventoried complete including decals and instructions.

AMT 1937 Chevrolet Convertible - Stock or Street Rod, 1/25, T316-200

Plastic Model Kit,   Box Condition: VG+

$54   

Older issue from the mid/late 1960s with fantastic box art titled 'Staging Area.' Very well detailed and can be built one of two ways - stock or racing. Includes extensive customizing and racing parts. Features detailed Stovebolt 6 engine with stock carbs or dual carbs with chrome air cleaners, stock or chrome valve cover, blown 427 engine, detailed engine compartment with removable hood and custom clear plastic hood, very good chassis detail with separately molded front springs with shocks, front axle, brake backing plates, steering arm, tie rods, racing link, drive shaft, rear axle and springs and exhaust, choice of stock or racing wheels, Cragar racing wheels with trim rings, complete stock interior or custom interior with buckets, roll bar, shoulder harness and custom wheels, shifter and dash, optional position stock convertible top, numerous custom body parts and a very large sheet of decals. Molded in white, clear, red-tint clear, chrome and with rubber tires. The kit has never been started. The parts that were factory sealed (white plastic) are still in the sealed bags. The parts that were not factory sealed (chrome and clear) have been inventoried complete including decals and instructions.

AMT 1963 Ford 500 XL Sports Hardtop 2 Door 3 in 1 - Stock / Custom / Advanced Custom, 1/25, 6123-200

Plastic Model Kit,   Box Condition: Good

$69   

Hard-to-find original issue from the early 1960s. Features stock or supercharged engine, detailed engine bay, opening hood, full interior, numerous custom parts, wild custom front and rear end treatments, accessories and custom decals. The kit has never been started. Inventoried with all plastic parts present and with decals and instructions but NOTE: missing AMT body putty tube and sand paper.

MPC Ford Mark IV Lemans Winner With Clear Trailer Van / Display Case, 1/25, 504-300

Plastic Model Kit,   Box Condition: Good-

$120   

Rare kit with well detailed Lemans car. Includes a 60 piece trailer with clear top, sides, front and opening rear doors, colored plastic frame and bed, fenders, chrome lights, detachable loading ramps, trailer hitch, tool box with opening doors, compressor, fire extinguisher, oil cans and gas cans. The car itself features a one piece underbody chassis, detailed Ford 427 CID engine and driveline, optional position rear engine cover with support rods, full interior, very well detailed front and rear suspension, turnable front wheels, full exhaust, oil cooler and fill tube, spare tire and more. Molded in white, chrome, clear, red-tint clear and with real rubber tires. The kit has never been started. The parts that MPC put into internal factory sealed bags (white car and clear and red trailer parts) are all still sealed. The parts that were never sealed (chrome, race car clear and red tint clear and rubber tires) have been inventoried complete including decals and instructions.

AMT The Monkeemobile Modified GTO - (The Monkees Mobile), 1/25, 605-200

Plastic Model Kit,   Box Condition: Good++

$125   

Rare original issue dated 1967. The original two 'mobiles were designed by Dan Jeffries, not George Barris. Both cars were used to promote the Monkees and the hit TV show. Features detailed 389 CID GTO engine with blower, molded underside with separate rear suspension and exhaust system, full custom interior, optional touring car convertible top, custom wheels and Monkees keychain. Molded in the correct dark gloss red, clear, chrome and with real rubber tires. The chrome is 'excellent++.' The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. Please NOTE that the decals are complete and intact but the background paper is stained and there are a few small parts lifting. I have put them in a zip lock to keep them intact. The box top is actually 'excellent' but I have graded the box 'good++' because there are water stains on the box bottom (box tray).

MPC Lotus STP Indy Turbine Car with Tractor, 1/25, 800-150

Plastic Model Kit,   Box Condition: VG++

$45   

Original issue from 1968 of the unusual Turbine car. Features detailed turbine engine and four wheel drive set up, hollow rubber tires, interior with bucket seat, fire extinguisher, roll bar, instrument panel and competition steering wheel, disc brakes, battery and braces, detailed suspension and a scale model of a track tow tractor. Molded in bright dark red, chrome and clear with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear parts were never factory sealed and have been inventoried complete including decals and instructions.

MPC Donnie Allison NASCAR Mercury Cyclone, 1/25, 1-1704-225

Plastic Model Kit,   Box Condition: Exc+

$59   

Original issue from the early to mid 1970s. Well detailed with full race interior and roll cage, full suspension, detailed engine and driveline, opening hood and much more. Molded in white, black, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear parts were never factory sealed and have been inventoried complete including (near mint) decals and instructions.

MPC Jim Hurtubise NASCAR Chevrolet Chevelle, 1/25, 1-1703-225

Plastic Model Kit,   Box Condition: VG++

$129   

From the early 1970s. Features detailed engine and compartment, opening hood, detailed suspension, full race interior with roll cage and full, authentic decals. Molded in white, black, clear, chrome plate and with rubber tires. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The chrome and clear parts were never factory sealed and have been inventoried complete including very good decals and instructions. Decals are intact but have micro-cracking.

Williams Brothers Gee Bee 'Z' Racer - 1931 Thompson Trophy Winner - Wasp Jr or Wasp Sr. Aircraft, 1/32, 32-426

Plastic Model Kit,   Box Condition: Sealed VG

$42   

Still factory sealed. Detailed and large kit of the classic 1930s racer. Features parts to build early Wasp Jr or later Wasp Sr versions, full cockpit, hard or real rubber wheels, rigging material, rigging diagram and colorful decals.

Williams Brothers German Parabellum Machine Gun for Large Scale RC Aircraft, 2 Inch, 163-298

Plastic Model Kit,   Box Condition: Sealed VG

$14   

Still factory detailed. Highly detailed large scale machine gun kit measures 7.5 inches long when assembled. Originally issued as an accessory for super detailing RC, free flight or control line aircraft kits.

Williams Brothers Wright J-5 Whirlwind Engine Cylinder Kit - for Large Scale RC Aircraft - Bagged, 2 Inch

Plastic Model Kit,   Box Condition: Sealed VG

$4   

Still factory sealed. Originally made for large scale RC Aircraft. Cylinders measure 2.1 inches high and 1.25 inches in diameter at the middle of the cylinder.