Old Plastic Model Kits

Plastic model kits, airplane kits, etc., for sale.

Be the first to know when kits are listed!

Checkout »

0 item(s) in your cart.
Search:

Airfix McDonnell F-4B/C/D/E & J Phantom II - US Navy / US or Israeli Air Force, 1/72, 04013-8

Plastic Model Kit,   Box Condition: Good-

$34   

1970s issue. Includes optional parts and decals to build F4B from VF-74 USS Forrestal, F4C US Air Force, F4D USAF, F4E Israeli Air Force or F4J of VF-31 USS Saratoga. Underwing stores include gun pods, fuel tanks, iron bombs, and AIM-7 Sparrow missiles. The kit has never been started. It has been inventoried complete with all parts and includes decals and instructions. NOTE: box has moisture damage to one short side. The kit inside is 'excellent' however. Decals look 'excellent' but you should be prepared to use your own decals since moisture was present at some point in the past.

VP Blohm & Voss BV-40 Armored Attack Glider - Bagged, 1/72

Vacuform Model Kit,   Box Condition: Good-

$14   

Very high quality vac kit. Beautifully molded with all fine recessed panel lines. Includes white vac parts and clear window material. The kit has never been started. It has been inventoried complete with all parts and includes instructions.

MPC Chevrolet Chevelle Pepsi Stock Car, 1/25, 1-1712

Plastic Model Kit,   Box Condition: Sealed Exc++

$35   

Still factory sealed. Dated 1977. Features full racing chassis, roll cage, race interior, Chevy racing V-8 engine, opening hood, one piece body, Pepsi decals and much more.

MPC 1971 Dodge Charger Pre-Painted Body - Stock / Drag / Wild Customer Racer, 1/25, 1-7107-250

Plastic Model Kit,   Box Condition: VG+

$129   

Very rare issue with the George Barris pre-painted 'Custom Fogged' body. Can build any one of the three versions listed. Nicely detailed kit with many optional parts, full engine and compartment, opening hood, detailed underside, full interior and more. The kit has never been started. The color parts that were factory sealed are still in the sealed bags. The clear and chrome parts were never factory sealed have been inventoried complete including decals and instructions.

Revell Peterbilt 359 Conventional Tractor Semi Truck, 1/25, 85-1506

Plastic Model Kit,   Box Condition: Sealed Exc+

$38   

Still factory sealed. 2006 issue. Features opening hood, fully detailed engine and engine compartment, complete cab and sleeper interior, opening doors, complete underside suspension, exhaust and chassis detail, rubber tires and more.

ITC Mercer Raceabout Motorized Cam-a-Matic with Working Lights, 1/8, 36376-895

Plastic Model Kit,   Box Condition: VG

$325   

The largest injection molded kit ever made of this famous car. From the very early 1960s; features good detail for that time and operates realistically with Cam-a-Matic action. Car moves forward with real motor sound, then begins one of several pre-set steering patterns via one of four cams, stops at selected intervals, then flashes the headlights on then reverses at selected intervals! Measures about 17 inches long when built. Molded in red, black, clear and with plated plastic. Inside the kit is near mint. All internal packing material is present and 'excellent.' All the parts that were factory sealed are still in factory sealed bags. That includes the motor and all metal parts, plated parts, wheels/tires and two bags of red/black parts. The few very large parts and three metal rods what were never factory sealed have been inventoried complete, with an 'excellent' pin-stripe and instrument sticker sheet and 'excellent' instructions. The box displays better than the 'very good' grade but is graded as such due to a closed split on one box bottom corner and one box top corner (right upper side).

Monogram Speedee-Bilt Boeing Kaydet PT-17, G5

Wood Model Kit,   Box Condition: Good-

$58   

Rare 'Speedee-Bilt' kit from the late 1940s. These were highly prefabricated flying model kits with beautiful, completely finished wings carved from one piece of thick balsa, die-cut, pre-painted balsa parts, colored tissue, plastic details and more. This model features two perfect 'Mono-Foil' factory finished wings, yellow painted die-cut parts, yellow covering tissue, pre-shaped fuselage forward balsa block, strip stock as required, rubber motor, finished and painted wheels, fully formed wire landing gear, plastic engine, sandpaper, excellent decals, early small Monogram catalog, small how-to-fly-your-models brochure and full size plans with step-by-step instructions. This kit has never been started. NOTE: Missing celluloid windows, prop and small balsa parts #1, 3 and 4 - those three are fuselage formers and easily made and not visible when assembled. Otherwise inventoried with all other parts, decals and instructions present.

AMT 1966 Oldsmobile W-30 442 2 Door Hardtop - Stock or Drag, 1/25, 6268

Plastic Model Kit,   Box Condition: Sealed NM

$26   

Still factory sealed. 1998 issue. Includes all parts for stock or drag versions. Nice kit with over 100 parts, detailed chassis and engine, opening hood, full interior and more. Molded in colored plastic, clear, chrome plate and with rubber tires.

AMT 1949 Mercury Club Coupe - Stock or Custom, 1/25, T291

Plastic Model Kit,   Box Condition: Sealed NM

$42   

Still factory sealed. Molded in white, clear and chrome with black softer plastic tires. Stock version features opening hood and trunk, complete engine and compartment, underside and suspension detail and full interior. Custom version parts include 412 Chrysler ram-induction V8 engine, dropped front end with reversed chrome wheels, baby moon caps, wide Goodyear tires, tunneled headlights, floating grill bar, rolled pans, spotlights, bucket seats, console, floor shift, gauges, phone, TV, jack and tools for the trunk, Caddy bullet tail lights, dual pipes, and more. Never started. Factory sealed bag or inventoried 100% complete with all parts, decals and instructions.

AMT 1956 Ford Fairlane Victoria Hardtop - Stock / Custom / Drag, 1/25, T271

Plastic Model Kit,   Box Condition: VG

$52   

Highly detailed kit with over 170 parts. Has parts for stock or custom versions. Features full engine with options for all variants, detailed underside, complete interior, opening doors and hood. Molded in color, clear, chrome and rubber. The kit has never been started. The chrome parts are still in the factory sealed bags. The parts that are not internally sealed have been inventoried complete, including decals and instructions.

AMT 1950 Ford Convertible Coupe - Stock or Custom Street Rod, 1/25, T353

Plastic Model Kit,   Box Condition: Sealed Exc

$32   

Still factory sealed. Builds a stock Ford with the top up or down or a custom version with optional Landau roof. Features detailed Flathead V-8 with stock or speed equipment, very nice engine compartment with opening hood, detailed suspension and underside, full interior and a large number of optional custom parts.

Guillows Lockheed P-38L Lightning - 40 Inch Wingspan Flying Model, 1/13, 2001

Wood and Plastic Model Kit,   Box Condition: VG

$64   

Very large flying model for free flight, .049 U-Control, static display or rubber power. Although it is not in the instructions, many people have converted this model to R/C with electric power. Includes stick and tissue construction, a large number of plastic vac parts, clear vac canopy, detailed cardstock parts, full decals and much more. The kit has never been started. The parts that were factory sealed are still in the sealed bags. The parts that were not factory sealed have been inventoried complete including decals and instructions.

Nichimo IJN Kongo Battleship Motorized, 1/742, 304

Plastic Model Kit,   Box Condition: Exc++

$24   

Can be built three ways - for water operation, full hull display model or waterline display mode. Older but nicely detailed kit is molded in dark red and dark gray and includes battery box with metal contacts, on/off switch, metal drive shaft, flexible coupler, stuffing box, easily removable superstructure for battery access and more. Please note that Nichimo did not include the motor (FA130 type) or batteries with this kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Nichimo IJN Hyuga Battleship Motorized, 1/694, 310

Plastic Model Kit,   Box Condition: NM

$24   

Can be built three ways - for water operation, full hull display model or waterline display mode. Older but nicely detailed kit is molded in dark red and dark gray and includes battery box with metal contacts, on/off switch, metal drive shaft, flexible coupler, stuffing box, easily removable superstructure for battery access and more. Please note that Nichimo did not include the motor (FA130 type) or batteries with this kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Nichimo IJN Haruna Battleship Motorized, 1/742, 311

Plastic Model Kit,   Box Condition: Exc++

$24   

Can be built three ways - for water operation, full hull display model or waterline display mode. Older but nicely detailed kit is molded in dark red and dark gray and includes battery box with metal contacts, on/off switch, metal drive shaft, flexible coupler, stuffing box, easily removable superstructure for battery access and more. Please note that Nichimo did not include the motor (FA130 type) or batteries with this kit. The kit has never been started. The parts are still in the internal factory sealed bags and includes instructions.

Comet P-51D Mustang Struct-O-Speed Flying Model, F11

Wood Model Kit,   Box Condition: Good-

$28   

From the early 1950s. Comet advertises that the Struct-O-Speed series 'Puts Itself Together...That Quick!' on the box top. These kits were very highly prefabricated for their time, and in comparison to the regular stick and tissue models, the claim is not unfounded. Features three sheets of die-cut balsa wood main parts, 13 inch wingspan, finished wooden wheels, rubber motor, plastic prop and bushing (although the instructions show a balsa prop),paper insignia and full plans/instructions. Never started. Inventoried complete with all parts and excellent plans. Die-cut wooden parts have not been punched out and are intact in the sheets.

Revell Spanish Galleon, 1/65, H400

Plastic Model Kit,   Box Condition: Good-

$95   

NOTE: builder only, please read carefully. 1974 issue. Highly detailed and large model, measuring 28.5 inches long and 25 inches high. Features full hull, detailed cannon and deck fittings, vac sails, large colorful decal sheet with designs on them as per the box artwork, large color flag sheet, pre-formed ratlines and more. Full rigging instructions and material are included. Two of the vac sails have closed splits from the plastic being brittle. The kit has no assembly and is inventoried 100% complete with all parts, decals, flag sheet, instructions, rigging diagram and rigging material. NOTE: this kit has some very neatly done painting. The hull halves, (2) rear superstructure, fantail and cannons are painted. As you can see from the sample photo, the quality of paint is 'excellent+' to 'professional' with the only problem being that another coat is required in some places (on the hull for example). Also, 2.2 inches of the port bow tip is broken and missing. Fortunately, this is a part that can be made by first assembly the hull halves, then gluing sheet styrene to the existing starboard tip. Then shape the styrene to match the starboard side.

Mantua Golden Star English Brigantine - 20.5 Inch Long Wood Model, 1/150, 769

Wood Model Kit,   Box Condition: VG

$95   

Excellent plank-on-frame model featuring die-cut, quality plywood bulkheads, deck and other parts, thick plywood center bulkhead support (keel), hardwood dowels as required, quality hardwood strips for planking, other wood as required, a large factory cardboard sheet with 7 factory sealed fittings bags still stapled in place, a giant detailed instruction sheet and full size plans. Fittings include over 100 brass and wood parts as well as rigging thread. The kit has not been started. No parts have been punched out. All fittings are factory sealed; the parts that were never factory sealed are complete with plans and instructions.3

ERTL Pontiac Trans Am With Metal Body - Blueprint Replica, 1/25, 8103

Plastic Model Kit,   Box Condition: Sealed Exc++

$26   

Still factory sealed. Very nice kit with cast metal body and body parts and injection molded details. Features detailed engine and engine compartment, opening hood, full interior with front seats that tilt forward, package tray speakers and CB radio, opening doors, optional 'T' top and opening trunk. The box says that the metal parts are already trimmed (no flash) and cleaned; it is advertised as ready to paint. This is a huge advantage if you are familiar with other metal kits.

Life-Like 1932 Lincoln KB Sport Convertible - (ex-Pyro), 1/32, 09342

Plastic Model Kit,   Box Condition: Sealed NM

$38   

1970s Life-Like issue from the original 1965 Pyro molds. In the early to mid 1960s the Pyro company chose many of it's kit subjects based more on historical significance than popularity. Luckily for us, Pyro not only made these kits but did an excellent job for the time. The Pyro car models are based on the actual cars that Pyro engineers and designers had access to. Features detailed chassis with suspension, gas tank and steering linkage, complete motor and interior, spoked wheels, optional convertible top and removable hood. The kit has never been started. Inventoried 100% complete including instructions.